USP Class VI Medical

EP42HT-4AOMed Black Product Information

EP42HT-4AOMed Black Two Component Epoxy

Two Component, Room Temperature Curable Epoxy Adhesive, Sealant, Coating and Encapsulating System Featuring Outstanding Heat, Chemical and Steam Resistance for Medical Device Manufacturing.

EP40Med Product Information

EP40Med Two Part Epoxy

Two Component, Flexible, Low Viscosity Epoxy Compound Meets ISO 10993-5 certification. Outstanding Shear and Peel Strength For Bonding, Potting, And Sealing. Excellent Adhesion To Engineering Plastics And Metals, Polycarbonates And Acrylics

EP30DPBFMed Product Information

EP30DPMed Two Component Epoxy-Urethane Blended System

Meets USP Class VI Specifications for Medical Applications Flexibilized, Two Component , Epoxy-Urethane Blend Used For Bonding, Coating, Sealing and Encapsulation, Featuring Superior Toughness, Repairability, Abrasion Resistance, and Cryogenic Serviceability

UV22DC80-1Med Product Information

UV Dual Curing System UV22DC80-1Med

One Component, Nanosilica Filled UV Curable Epoxy System Meets ISO 10993-5 for Cytotoxicity

EP62-1LPSPMed Product Information

EP62-1LPSPMed Two Component Epoxy

Two Component Epoxy System Features a Very Long Pot Life at Ambient Temperatures Combined with Rapid Cures Chemical and High Temperature Resistance

EP3HTND-2Med Black Product Information

One Part Epoxy EP3HTND-2Med-Black

One Component, Epoxy System for Bonding, Sealing and Coating Featuring Very Fast Cure along with High Shear Strength Properties. Meets USP Class VI Specifications.

EP42HT-2Med Black Product Information

EP42HT-2Med Two Part Epoxy System

Two Component, Room Temperature Curable, High Temperature Resistant Epoxy System, Sealant, Coating and Casting System Resists Multiple Cycles of Medical Sterilization Including Radiation, Chemicals and Steam.

Meets USP Class VI Requirements.

UV15DC80Med Product Information

UV15DC80Med One Part UV & Heat Curing Epoxy

One Component, UV and Heat Curable Epoxy System for High Performance Bonding, Coating and Sealing. Dual Cure System Allows for Curing in “Shadowed Out” Areas at Temperatures as Low as 80°C.

MasterSil 912Med Product Information

MasterSil 912Med One Part RTV Silicone System

Biocompatible. Pass USP Class VI and ISO cytotoxicity testing. Non-corrosive, neutral type curing system. Good sterilization resistance properties. Withstand rigorous thermal cycling. Elongation 250-350%. Volume resistivit >1015 ohm-cm. Tensile strength 700-1100psi.

MasterSil 910Med Product Information

MasterSil 910Med One Part Silicone System

One Component, Room Temperature Curing Silicone Elastomer Adhesive
for High Performance Bonding and Sealing. Fast Curing and Non-Corrosive.
Meets MIL-A-46146.

Pages